Tel: +86-29-86458193

High Speed Milk Used Spray Dryer

High Speed Milk Used Spray Dryer

3L/hour small scale spray dryer
1. Air pressure or centrifugal atomizer for your optional
2. PLC control,get good shape natural spherical powder directly

Detailed description

3L/hour small scale spray dryer


Technical parameters of 3L Labratory Spray Dryer:

Model

TF-S3L 

(air pressure type)

TF-S3L

 (centrifugal type)

Max capacity

3L/hour

3L/hour

Temperature range of Inlet air

30°C -300°C

30°C -300°C

Temperature range of outlet air

30°C -140°C

30°C -140°C

Precision of temperature

± 1 °C

± 1 °C

Dryer time

1.0-1.5 S

1.0-1.5 S

Speed of squirt pump

3000ml/hour

3000ml/hour

 Spray system

Two- fluid nozzle (0.75/1.0/1.5/2.0/2.5mm)

Centrifugal nozzle

Spray direction

downwards co-current

downwards co-current

Heater power

3KW 220V

3KW 220V

Total power

10KW 380V

10KW 380V

Heat source

Electric

Electric

Air compressor

Built-in oil-free air compressor

Built-in oil-free air compressor

Dried powder restoring rate

≥95%

≥95%

Overall dimension

1700*1100*150mm

1700*1100*150mm

Lab mini spray dryer


two-fluid spray dryer


 Features of Lab Scale Spray Dryers‎
At a high speed of drying, after the spraying of the material liquid, the surface area of the material will be increased greatly. In the hot-air flow, 95%~98% of water can be evaporated at a moment. The time of completing the drying needs only several seconds.
This is especially suitable for drying the heat sensitive materials. Its final products own the good uniformity, mobility, dissolving capacity. And the final products are high in their purity and good in their quality. The production procedures are simple and the operation and control are easy. The liquid with the moisture contents 40~60% (for special materials, the contents may reach 90%.) can be dried into the powder or particle products once a time. After the drying, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product purity. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition in a certain scope. It is very convenient to carry out the control and management.

 


Principle of Lab Scale Spray Dryers‎:

After been filtered and heated the air enters into the air distributor on the top of the dryer. The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower, the material liquid will rotate and be sprayed into the extremely fine mist liquid beads. Through the very short time of contacting the heat air, the materials can be dried into the final products. The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.

 

 

Application  of Lab Scale Spray Dryers‎:

Spray dryer can be used in a wide range where the production of a free-flowing powder sample is required. This technique has processed materials in the following areas successfully:

 

Beverages, Flavours and Colouring, Milk and Egg Products, Plant and Vegetable Extracts, Pharmaceuticals, Heat sensitive Materials, Plastics, Polymers and Resins, Perfumes, Ceramics and Advanced Materials, Soaps and Detergents, Blood, dyestuffs, Food Stuffs, Adhesives, Oxides, Textiles, Bones, Teeth and Tooth Amalgan and many others.

 

Most solutions and supernsions can be spray dried providing that the resulting product has the characteristics of material.
  It is popular in fields of Food, biology, material, pharmacy, university, and R&D institute, etc. especially for processing temperature-sensitive material , for e.g., powder, because material only touch air for a brief moment so that heat couldn't destroy the component of material.  

 

 Working Principle of Lab Scale Spray Dryers‎

The air are filtered and heated ,then into the distributor on the top of the dryer, spiral hot air evenly go into drying chamber .

 

Liquid through the high-speed centrifugal atomizer on the top of the tower ,  then (rotation)spray into very fine mist droplets,contact with hot air and dried into the finished product in a very short time . Dried product are continuously produced from the bottom of the drying tower and the cyclone , the exhaust are vented by fan .


                                          标签1_副本0.jpg

TEFIC customer

                          

                                            标签1_副本.jpg

TEFIC certificte



TEFIC package

TEFIC package



Our team

after service.jpg

 Welcome to call us at any time 

 



TEFIC BIOTECH now has 3l small scale spray dryers with centrifugal atomizer price, high speed milk used spray dryer for sale, used spray dryer for sale for sale. As one of the leading manufacturers and suppliers in China, we can help you set up new equipment or the used products as well as the best quality parts at cheap price. All of our products are of the best design, please rest assured to buy.

Related Products
Feedback